Reliable turbine mass flow meter factory: Useful for Gases and Liquids: Mass flow meters can be used for both gases and liquids. They are commonly used in applications where precise control over mass flow is necessary, such as chemical processing, gas distribution, and HVAC systems. Because mass flow meters measure mass directly, they are less affected by temperature and pressure variations. They are frequently used when the fluid’s temperature and pressure are subject to significant fluctuations. See even more details at turbine flow meter manufacturer.
Wholesale vortex flow meter is used for liquid flow measurement, which is favored by users: it has a wide range, small pressure loss, medium-to-high accuracy, linear output, no moving parts, high reliability, and low maintenance. , The price is medium and low, and the performance price is relatively high. In terms of measuring liquid flow, vortex flowmeters are used in the following fields: Flow measurement of various industrial water, including circulating water, waste water and waste liquid in various production processes in chemical, light industry, electric power, metallurgy, building materials, petroleum and other industries.
It is the existence of domestic brands that has forced the prices of foreign brands to drop by 1/2-2/3 in recent years. The production and R&D investment of natural gas turbine meter is relatively large, and the prices of enterprises with certain strength will also be higher in domestic brands. But even then, they are only about half the price of high-end international brands. Therefore, it is recommended that users choose carefully on the basis of comprehensive consideration of their respective use requirements and procurement costs. Don’t pursue low prices too much, nor do you need to pursue imported brands inappropriately.
Beijing Sincerity Automatic Equipment Co., Ltd is a research and development center, focusing only on one type of flow meter, the Coriolis mass flow meter, which has been in use for 33 years. Our Coriolis mass flow has reached the international leading level. We provide three types of Coriolis mass flowmeters, including U-shaped, micro-bent V-shaped and triangular, to meet the different needs of different industries. We can provide coriolis flow meter with ultra high pressure of 100MPa, ultra high temperature of 350 C, and minimum temperature of -300 C. We can also measure ultra-high viscosity liquids, such as 70,000 cps glue. We have been very successful with gas measurements such as hydrogen. In addition, we have been very successful in two-phase / three-phase / multiphase flow liquid measurement. We support OEM services. You can even customize the internal software for Coriolis mass flow meters. We also support market agents. Read more info at https://www.bjssae.com/.
Sincerity, excellence in coriolis flow meter production with 33 years experience, Since 1987.Through continuous research, development and transformation, we have become the leader of the Coriolis Mass Flow Meters industries in China.Our products including coriolis mass flow meter,thermal mass flow meter,fork density meter and etc.We have 100+ workers and 5000+ factory,our customers from all over the world. We support OEM coriolis mass flow meter name plates.
Install the total steam flow meter before the pressure reducing valve. Since the above-mentioned steam has not been decompressed, there is no phase change problem, so install the flowmeter before the pressure reducing valve, and use the saturated steam compensation method to ensure the measurement Accuracy. If the flowmeter can only be installed behind the pressure reducing valve, a pressure transmitter can be added for temperature and pressure compensation. If the stability of the pressure reducing valve is good, the upstream pressure value of the flowmeter can be set as a constant value in the display instrument for temperature and pressure compensation.
Day for day vast quantities of oil and gas are transported across the globe, refined and transported further. Mature and foolproof technology is essential. But it is the control through instrumentation and visualisation that help make all these processes safe and reliable. The Coriolis Insertion Density Meters could be used for the detection of the liquid’s density. The insertion density meters are the best choices for the proccess control as the basic parameters of density, and also for the quality control with the solid percentage or the concentration for references.