Premium topcoat paint and brake caliper paint online store by por15.com? POR-15 Rust Preventive Coating is a high performance coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
POR-15 Alloy Prep Soft Metal Etching Rust Neutralizer (formerly AP-120 Metal Prep) is designed exclusively for use with our 2K Urethane Clear, Alloy Prep guarantees perfect adhesion of 2K Urethane to any metal surface, especially chrome or polished aluminum, where good adhesion is often difficult to achieve and where other solutions may discolor. Alloy Prep is non-flammable with no noxious fumes. Wear rubber or latex gloves when using.
POR-15 Caliper Paint is formulated for high heat performance applications. When properly applied POR-15 Caliper Paint will provide a tough and attractive coating that will satisfy even the most demanding car enthusiast. POR-15 Caliper Paint has excellent coverage properties, 5 brilliant ceramic-like colors, and withstands temperatures up to 350°F. Also available in the POR-15 Caliper Painting Kit. The kit contains the proper preparation products and accessories for painting calipers. Great for do-it-yourselfers and first time users. Discover extra information at caliper paint.
Remove all four wheels from vehicle. Calipers don’t need to be removed. Don’t remove brake line. Clean surfaces to be painted with POR-15 Cleaner Degreaser. Spray on the cleaner and brush the dirt, grease and grime with a small scrub brush or toothbrush. Wear protective gloves and glasses when cleaning your calipers. Read directions on POR-15 Cleaner Degreaser container before using. Rinse cleaned caliper thoroughly with water and dry with clean towel. Now apply POR-15 Metal Prep and keep surface wet for 20 minutes and then wash off POR-15 Metal Prep with water and dry thoroughly.
We make a product called ‘Metal-Ready’. It’s a rust remover that leaves a zinc phosphate coating on base metal, the perfect preprimer for POR-15. NOTE: New steel is coated with a protective oil finish at the mill. This finish must be removed before using POR-15 or Metal-Ready. Clean metal first with POR-15 Marine-Clean, then rinse with water and dry. Silver contains metal filler and should be used in badly rusted, pitted areas. It will fill in holes better than black or clear. Black is generally used on frames, underside of fenders, etc. because that’s the usual color there. Clear renders the smoothest finish and is often used as a preprimer on exterior surfaces; Gray is great on concrete floors, bilges, storage areas, as well as steel as desired. Find even more details at https://por15.com/.