Recently, one of our consultants was carrying out a survey in a foundry. They had installed this type of booth for their fettling operations. However, as can be seen in the following photograph, The booth was not being used in the way intended – the worker was carrying out the work outside the booth. The dust generated was not contained and, consequently, the extraction would not be as effective as it should be. The worker will have a higher exposure than if he carried out the fettling inside the booth.
The Health and Safety Executive (HSE) are the government body responsible for the regulation and enforcement of work related risks to people in the work place. Dust & fume exposure is a key element of the COSHH 2002 (Control of Substances Hazard to Health) regulations setting out exposure limits, preventative guidelines and on going reductions of the contact between people and hazardous gas and particulates. Under COSHH, companies must take steps to prevent, control, maintain and monitor dust and fume exposure in the workplace, as laid out in regulation 9.
According to the HSE, around 13,000 workers in the UK die each year from historic work-related exposure to airborne contaminants at work leading to lung disease and various cancers. These figures are estimated to be attributed to past exposure, primarily to chemical and dust at work.
Equipment that draws pollutants from an operation or process in the working environment. Made up of an inlet like a hood, slit, arm, cabinet or booth. This will be located near to or close to the area of the substance release. All suchlike equipment needs to be connected by ducting and a fan to enable the movement of air. The removed air passed through a filter or is extracted to atmosphere away from the workplace. How Welding Supplies Direct can help ? WE will carry out a thorough tests in line with COSHH Regulation 9 as detailed in HSE Guide HSG258 Our levels of service can be tailored to your Companies needs. However, most clients choose to take advantage of by combining servicing with the LEV testing. See more info at HSE LEV Testing.
The employer must consider other control options and use them where appropriate (see HSE leaflets Working with substances hazardous to health1 and Clearing the air2) before applying LEV. In some circumstances, LEV may not be a reasonably practicable control as there may be many sources or extensive contaminant clouds that are too large for LEV alone to control. LEV suppliers provide goods (an LEV system) and may then act as a service provider. Designers interpret the requirements of the employer and advise on an effective LEV system which is capable of delivering the required control.