Rotary moulding machine manufacturer right now? As for the system, we adopt central control system, LCD touch screen operation and human machine Interface, it can be operated separately or together; For its Conveyor belt,we use Round canvas belt for cutter, pneumatic correction system. Last but not least,with our rotary machine, you can achieve more accurate and effective weight of dough pieces and high production as well as nice outer appearance and evenness in the thickness of the moulded products. Read more details on rotary molder. Apart from the integrated system hardware service, the services Golden Bake offers include all stages: from plant design, biscuit machinery construction, manufacture, and assembly up to the smooth commissioning phase at your site. Don’t be afraid to start a new project…
Adopting with pneumatic conveying system for transport powder in sealed pipe. Due to the weight measurement method, error less than 1kg. No dead angle in pipe without using screw conveyor. Adopting with pump conveying system for transport liquid in sealed pipe. Due to the weight measurement method, error less than 1kg. Avoid the error caused by the difference of material density and temperature in different batch, we don’t using flow measurement.
With the development of the times, innovative smart turning conveyor from Golden bake ends problems by smart buckle?automatic tensioning device,cantilever frame and integrative guide and PU belt. First our turning conveyor need at most 20mins to replace the PU belt by 1 worker. Second our machine maintenance free. Third smart turning machine use hygienic and safety design. Fourth our turning conveyor has more than 12 months service life.
To get good quality dough the hard dough is usually mixed on vertical dough mixer. Two or three paddle machines are used with high mixing speed, 25rpm. The high but gentle mixing action incorporates the ingredients well without undue work input at the sponge stage. The yeast should be dispersed in water before feeding to the mixing tub. The dough is mixed to a temperature of 30~35C, which is the optimum temperature for the action of the yeast. The sponge is fermented for 12hours at a temperature depends on the biscuit master. During this time the pH value will change from about 5.5 to 4.0 and the temperature of the dough will increase. After the fermentation of the dough, the dough tub is taken back to the mixing room. The additional ingredients for the dough are added, including the sodium bicarbonate. Gentle, slow speed mixing is required until homogeneous dough is made. Over-mixing will reduce the spring and give a hard, tough product. After mixing, the dough is returned to the fermentation room for up to 4 hours. With the addition of soda, a large change in the pH occurs and the dough will reach a pH of over 7.0.
Dough forming machine section is mainly used for forming the dough. Different biscuit uses different forming section. The forming machine used is also different. The forming of hard dough biscuit is much more complicated than soft dough biscuit. Dough shaping machine used is different. Soft dough biscuit forming by the rotary moulder. The dough should be fed very evenly and consistently to the hopper of the rotary moulder, maintaining an even level across the width of the machine during the production. Find more information at foodsmachine.net.