Fast booking car Mot Test and service in Reading? The truth is, there will be elements of your car that you won’t be able to check yourself; however, there are parts that you can inspect and you should make sure that they are in good condition and full working order before going in for your MOT, otherwise you could fail on something minor and relatively simple to solve. How do you pass an MOT? The answer lies simply in looking after your car and checking that some fundamental things are in good working order before taking it to the garage.
Aside from all the tips included in this list, car owners should take their car to a mechanic for a general checkup. If you bought the car at a dealership, they might send you a reminder in the mail to take your car for a checkup. During these checkups, they might inspect the car exhaust, flush the cooling system, and replace any parts needed, such as brakes, valves, and hoses. Regular checkups are in general pretty low cost and can ensure your car is in great shape for years to come.
We Also Offer The Following Services, A Free Collection And Delivery Service within a 10 mile radius, a Small charge may apply if you are further afield but we will never refuse on the grounds that you are to far away,we also have a Onsite Valeting Service, A 24 Hour Recovery Service, Cam-belt Replacement, Clutch Replacement, , Car Air Conditioning, Car Exhausts and Brakes and all General Car and Vehicle Repairs are carried out on the premises.
Keep your records in order, and take them with you. Have records available on everything you do to maintain your car — and keep them in the car if possible. Well-kept records can be instrumental in correctly diagnosing a vehicle problem the first time. Incomplete records can lead to redundant auto repairs that waste your time and money. A vehicle with a well-documented repair service history also tells your mechanic that you value first-rate work at the recommended intervals, and have done your part to keep your vehicle in tip-top shape. Discover more info at Mot Reading.
Any tyre that doesn’t have at least 1.6mm of tread across the middle three-quarters is an instant MoT failure. Tyres with significant damage such as cuts, bulges or cracking will cost you a pass certificate too. All your vehicle’s lights must be clean and work correctly, or you will fail the MoT. So before you book it in, check they do. That means headlamps on full and dipped beam, sidelamps and daytime running lights, hazard lights and indicators, fog lamps if fitted, and even number plate lights at the back. You can pick up most bulbs from car accessory stores, and they’re usually easy to fit – if sometimes a little fiddly.
Probably the quickest and easiest test to do, and chances are that if this didn’t work, you’d already be aware of it and have had the fault fixed. So, as you’re doing your full pre-MOT checks, be sure to check the horn. The oil check is an important part of an MOT because without it, the garage will not be able to test emission levels. You can check this by taking a quick look under the bonnet. As you would when checking the brake fluid, do this test with the engine off and cool and the car parked on a flat, even surface. Locate the dipstick and pull it out, then wipe off any excess oil to ensure that you’re starting with a clean stick. Next, dip the dipstick back in and remove once more. You should see the oil sitting between the ‘min’ and ‘max’ marking on the dipstick. If you don’t, it’s time to top up your oil.
An MOT is a legal requirement after three years. Without it your insurance is invalidated, and you could be fined. There’s another important aspect to the MOT. It proves that your car is roadworthy, and safe to drive. Vehicles have a lot of stresses put upon them. As they age the chances of parts wearing or failing increase. An MOT test can help to spot problems before they occur. Call Reading Service & MOT Centre today. We perform fair and thorough MOTs for all cars and motorbikes.
Headlights and indicators: front, rear, headlights (main beam and dipped), hazard lights and indicators. If any aren’t working, first check for broken bulbs and replace them. Brake lights: ask another person to check the rear brake lights come on when you press the brake pedal. Tyres: check all the tyres have at least the minimum legal tread depth of 1.6mm, or they’ll be marked as an MOT ‘fail’. This can easily be done with a 20p coin – see the diagram on the Tyre Safe website. Check for any damage such as splits in the tread, bulges or cuts in the sidewalls. Also check the tyre pressure is correct – the car’s manual will list the right pressure and they might also be on the sidewall of the tyre itself – and increase it at a petrol station if necessary. Discover additional information on this website.