Excellent centrifuge machine manufacturer factory: The variable pump impeller technology can adjust the thickness of the liquid layer inside the machine while it is running, so that the Decanter centrifuge can be quickly adjusted without stopping to achieve separation effect. New independent drive system. The structural feature of the new independent drive system is that the drive of the rotary cylinder and the screw are respectively driven by two vertical variable frequency motors. A new type of gearbox is used to connect the drum and the screw. In addition to withstanding high torque, this gearbox can also independently rotate the screw without the drum rotating. Through the above discussion and analysis, it is not difficult to see that the influence of structural design on the processing capacity of decanter centrifuge is mainly reflected in the selection and design of mechanical parameters and corresponding auxiliary equipment. If each problem is considered comprehensively and concretely, it can also be considered comprehensively and concretely. The decanter centrifuge can better serve the solid-liquid separation field of various industries in our country. See even more details on decanter centrifuge manufacturer.
The materials then flow into the inner cavity of the bowl, which rotates in synchronization with the bowl. Because of their different specific gravities, the three types of centrifugal forces are as follows: the strongest for solids, the second strongest for heavy-phase liquids (like water), and the weakest for light-phase liquids (like oil). This allows the centrifugal force to work magic, forming an outer solid layer and two inner liquid layers. The solid material that has been deposited on the inside wall of the bowl is moved to the machine’s solid outlet using the screw, where it is dried further using extrusion and subsequently released. Meanwhile, the liquid material flows to the machine’s liquid phase outlet and overflows at various points, separating the solid, heavy, and light liquid phases. The Shenzhou Machinery 3-phase decanter centrifuge uses centripetal pump technology to determine the optimal placement of the liquid discharge layer based on the relative proportions of the heavy and light liquid phases and to adjust the position of the neutral layer of these phases. Additionally, the centripetal pump serves as the heavy liquid phase flow outlet, making it an ideal choice for pipeline layout.
What industry is the decanter centrifuge used for? Decanter centrifuge working principleļ¼Centrifuges are useful in most industries where solids, liquids, and gases are mixed into a single substance, but separating the components is necessary. For example, decanters (also known as solid bowl centrifuges) continuously separate solids from liquids in slurries and therefore play an essential role in wastewater treatment, chemical, petroleum, and food processing industries. The basic principle of a decanter centrifuge relies on buoyant separation. The denser ingredients will fall to the bottom of the mixture while the less dense ones are suspended above. Due to a large centrifugal force, decanters rotate to separate the substances inside quickly. Before decanters were used, components took hours to settle, but a decanter centrifuge can take only a few seconds.
The full name of the decanter centrifuge is the horizontal screw decanter centrifuge, which is a widely used equipment in the field of industrial solid-liquid separation. According to the characteristics of different materials in different industries, Decanter centrifuge is divided into dewatering, separation, and clarifying decanter centrifuge. With centripetal pump technology, decanter centrifuge can also realize the 3-phase separation of liquid, liquid, and solids or two liquid phase separation. Decanter centrifuge can separate over 50%(v/v) solids from liquids on a continuous basis.Typical industrial decanter applications include Crude oil tank bottoms ,waste oil industrial,wastewater,sludge Decantering,Fish meal,WVO/UVO Desludging,Paint sludge ,Etc. If you are looking for a decanter centrifuge manufacturer, Shenzhou Machinery is your best choice. Read more info on https://www.lnszjx.com/.
Welcome all who care engaged in the separation and filtration to work with us,and we are also looking for the qualified world wide agents to provide better service and deep marketing. Shenzhou Machinery as the best custom decanter centrifuge and separator manufacturers, provides engineered 3D designs by 3D printer to meet your ideas. We have always followed the standardization rules for a rigorous production process, saving time and cost for both parties and bringing maximum benefits to you.
Rotating cone angle: the cone angle has a significant impact on the performance of solid flow rate. Due to the effect of centrifugal force, when particles reach the inner wall of the rotary drum and are transported forward by the spiral, they also have a tendency to flow backward. The speed of backward flow is related to the spiral angle, and finally reflected in the cone angle. Both have a direct impact on the conveying performance of solid particles, that is, as the reflux speed increases, the solid conveying speed decreases. The robustness of materials is reflected in the speed of the centrifuge, which directly affects the volumetric flow rate and mass flow rate. In addition, the corrosion of the centrifuge is also related to its material structure.